===================================================================== 2.7.4 Common: - Adjusted error state indication. Now the software will not display a success message if Dyno is still in emergency state. - Added missing fields to exported CSV files. - Added a new force map feature. - Added a new 3D hysteresis map feature. - Added a new 3D topographic mesh feature. - Added new style message dialogs. - Multiple small UI adjustments. Scotch-Yoke Dyno specific: - Removed unnecessary failed message after stopping manual mode. - PVP points are no longer overlaid by a curve. - Added missing explanation to PVP calculation method description. EMA specific: - Added live status indication for side-load control and for automatic crossbar. - Added an option to limit speed for custom pink noise signal. - Custom signal generator now properly applies fade-in and fade-out for sweep and chirp signals. - Implemented a new cross-correlation method to align actual vs original signals. - Implemented an up-sampling when applying a filter for low frequency track data signals. ===================================================================== 2.7.3 EMA specific: - Added new Side Load functionality support. ===================================================================== 2.7.2 Common: - Small hot-fixes. ===================================================================== 2.7.1 Common: - Added an option to view up to 10 recent project files. - Added test frequency to PVP CSV export. - Added a Custom CSV export option. EMA specific: - Added new option to automatically eliminate seal drag after test is completed. - Min/max speeds of each test has been reviewed and are now validated correctly. Scotch-Yoke Dyno specific: - Updated Test Builder to match the EMA UI design. - Fixed an issue preventing live data to display in Manual mode if dyno was not calibrated. - Fixed an issue that sometimes showed NaN when calculated Gas Pressure (PSI). ===================================================================== 2.7.0 Common: - Added an option to install a specific version of the software (downgrade). - Fixed some translation errors. - Updated Manufacturing mode, added new flexible schema. - Adjusted live data velocity and acceleration graphs. - Measure feature added to Graphs view. - Added an option to change legend position for printing. EMA specific: - Small fixes to signal generator. - Fixed an issue causing bad offset during CSV import into track data when position multiplier was not 1. - Added a new Cooldown test. - Software will now automatically re-download test data if there were communication issues during live test. Scotch-Yoke Dyno specific: - Fixed an issue that prevented opening some 3rd party data files. ===================================================================== 2.6.4 Common: - Adjusted CSV export metadata. - Stability improvements when using external DAQ. - Connectivity stability improvements. - Fixed an issue preventing PVP graph display for imported graphs. - Fixed an issue causing random graph colors upon selection. - Added an option to scale custom sensor channels individually. - Added an option to apply same graph color for all tests within selected project. - Offsets are now correctly applied to live data. - Minor bug fixes. EMA specific: - Added compatibility with the new Dyno model. - Added more informative error message to certain conditions. - Added new Seal Drag test. Scotch-Yoke Dyno specific: - Updates to manufacturing mode - schema file is now more flexible. - Fixed an issue that sometimes caused calibration to fail. - Minor adjustments to gas pressure force calculations. - Added shaft diameter and PSI calculation. ===================================================================== 2.6.3 Common: - Updated Test Summary for PVP tests. - Introduced custom graph scaling and offset feature. - Added Y Axis move feature for channel view. - Stability improvements when using external DAQ. - Added indication when graphs are visually adjusted. - Added an option to select all tests inside a project. - Adjusted CSV exported file naming. - Fixed graph overlay not updating issue. - Minor bug fixes. EMA specific: - Fixed an issue with Pass Fail feature. - Fixed motor temperature visual indication mismatch. - Small changes to Calibration feature. Scotch-Yoke Dyno specific: - Small adjustments to calibration feature. - Fixed an issue preventing proper opening of test presets. ===================================================================== 2.6.2 Common: - Minor translation updates for Chinese language. - Added an option to copy PVP table from test summary. - Added permanent crosshair option. - Adjustments to custom filters. - Added new PVP calculation option. - Fixed an issue that caused incorrect Rod Force elimination in graphs. - Added an option to change channel count in Channel view. - Added an option to move graphs vertically in Channel view. - Added an option to move mouse pointer with arrows in Channel view. - Added custom graph scaling and offset feature. - Minor bug fixes. EMA specific: - Fixed an issue preventing PVP export. - User facing calibration. - Fixed Pass-Fail calculation issues. - Fixed an issue that showed incorrect message during warmup. Scotch-Yoke Dyno specific: - Fixed an issue preventing long runs on older versions of the Dyno. ===================================================================== 2.6.1 - Minor bug fixes. ===================================================================== 2.6.0 Common: - Updated design - new loading screen and new software icon. - Translation fixes to multiple languages. - Fixed an issue in project list after drag and drop. - Improved stability through anonymous crash and performance reporting (no personal data collected). - Minor bug fixes. EMA specific: - Fixed an issue not allowing PVP printing. - Added new Sinewave on Sinewave waveform option. - Improved graph rendering. Scotch-Yoke Dyno specific: - Fixed an issue sometimes showing device as offline. - Adjusted default calibration speed for better performance. - Added auto-calibration before moving to Top or Bottom positions. ===================================================================== 2.5.5 Common: - Added Thai language translation. - Added additional validation for global filters. - Fixed a few issues related to remembering test settings between tests. - Added text field import from Excel for Project. - Added an option to switch PVP calculation method from Peak to Windowed mode. - Fixed a software crash related to external DAQ. - Minor bug fixes. EMA specific: - Added new rebound freefall feature. - Editing Custom test will now properly remember custom signal parameters. - Fixed an issue that sometimes prevented EMA firmware update. Scotch-Yoke Dyno specific: - Added goto Top and Bottom position commands in calibration view. - Fixed live graph refresh issue. - Fixed an issue not updating the Device status as "Online". - Fixed an issue that prevented Rod Force elimination from completed tests. - Added full DAQ support. - Added an option to switch from internal to external test preset configuration. ===================================================================== 2.5.4 Common: - Implemented new graph rendering, resulting in faster live data display. - Added an option to delete multiple selected items. - Added selected project label in Testing window. - Minor bug fixes. EMA specific: - Fixed "remember" function in Warmup test. ===================================================================== 2.5.3 Common: - Added an option to change project list tree checkbox behavior. - Fixed an issue with PVP zero point. - Implemented LIVE data feature - now during testing user can switch graphs. - Added live test compare - software will compare live data with selected tests. - Added an option to import test settings from external Excel file. - Added an option to compare PVP curves without selecting individual runs. - Minor bug fixes. EMA specific: - Adjusted how Gas Pressure curve is measured. - Updated the default Gas Pressure Elimination option entry in the settings menu. - Added an option to adjust live data window and live display sampling frequency. - Rod Force and Gas Pressure can no longer be eliminated together. - Measured Rod Force can no longer be edited. - Added Force shift option to tests. Scotch-Yoke Dyno specific: - Fixed an issue with inaccurate progress bar values. ===================================================================== 2.5.2 Common: - Added an option to change run names. - Updated progress bar visual appearance. - Added a feature to modify test settings before the test sequence is executed. - Added a feature to import test settings from already completed tests. - Added an option to change how test coloring works. - Added an option to adjust displayed live data window size and frequency. - Added custom global filtering for specific data channels. - Added an option to fill project fields from another project by opening a test file. - Added an option to copy/paste tests and runs in the project tree view. - Various improvements and minor bug fixes. EMA specific: - Added new EMA firmware to auto updater. - Updated test position requirements - now negative numbers are allowed as long as a test does not exceed machine limits. - Custom channels added to CSV export. - Added default value configuration option to test builder. - Updated custom data dialog - now user can trim custom waveform by Joining or Trimming sides. ===================================================================== 2.5.1 Common: - Added an option to change Run names. - Implemented a visual test progress bar with "%" indicator. - Added refresh button to custom DAQ configuration. - Reworked Operator mode. EMA specific: - Reworked test builder and added test configuration. - Armed/Disarmed status is now refreshed automatically. - Adjusted test force limits to properly include zero offset. - Fixed an issue that resulted in running test after disconnecting the software in the middle of test sequence. - Added an option to disable GPE by default. - Added an option to import test settings from already completed test runs. - Fixed an issue with bad calculations for Gas Pressure Elimination. - Added motor temperature to live info region. ===================================================================== 2.5.0 DISCLAIMER: * May require a Dyno software update. Please contact customer support or downgrade if any issues arise. Common: - Implemented STABLE and BETA release options. Can be located in the Registration page in Settings. - Added separate options to select default catalogs for data, configurations, and reporting - Added an option to run multiple instances of the Dyno software in offline mode - Added an option to default rod-force elimination - Added overlay PVP option - Added continue testing option - Added auto-open for the test edit window after test completion - Added custom fields to project items - Added a custom background color option for the project list - Added a custom interval option for speed tables - Greatly improved large-file loading and graph generation times - Replaced EMA/Shock Dyno mode with Graphs/Channels selection and moved it to the main screen - Added more metadata to CSV reports - Moved graph options from the Options menu to the graph selection area - Updated how PVP graphs are calculated - Added motion ratio to test settings - Added quick settings to the project contextual menu - Added support for importing multiple file formats - Updated project list appearance - Updated CSV data export format - Made small adjustments to printout reports - Renamed Protocols to Model and improved the dropdown options for easier selection in Dyno settings menu - Added a tooltip to completed tests indicating preset settings - Added support for multiple external data acquisition units - Added templates for external data acquisition channel configuration - Added Save As option project list context menu - Added Open Folder option to project list context menu - Files that were previously locked are now read-only - Various bug fixes and performance improvements Scotch-Yoke Dyno specific: - Added load-cell multiplier in Dyno settings - Added Imperial/Metric flywheel selection option - Added reduced filtering option for force data - Fixed an issue where the Dyno went into overload after a maximum-speed test - Reworked Dyno calibration from static to dynamic stroke and rod-force calculation - Increased warm-up temperature limit with a custom warning - Reworked Average Force vs. Displacement graph generation - Prints now indicate if Rod Force Elimination and/or First Run Average Elimination were applied - Reports now display whether the graph is CC/RO or RC/OO EMA specific: - Reworked EMA machine movement patterns - instead of releasing the motor, the machine now holds its position for a limited time to allow a smooth transition* - Reworked preload movement patterns for new tests* - Updated Control Loop configuration area - Added smooth transition between warm-up and other tests* - Control Loop parameters are now stored with completed tests - Fixed a bug that sometimes prevented further tests from running after a warm-up test - Added rounding to Impulse tests to prevent unwanted acceleration - Updated gas-pressure calibration movement patterns - Added Rod-Force Measurement test - Adjusted test-sequence validation to allow more unique combinations of tests - Added persist option to Control Loop configuration - Adjusted Pink Noise/Chirp/Sweep waveform generation - Added Exponential Sweep and Exponential Chirp to the signal generator - Adjusted Impulse tests to allow a negative direction - Added a temperature-increase check - Added an option to copy test settings from a selected test - Added a new Sawtooth waveform option - Added support for a second temperature sensor - Added ability to trim start and end of the interval test - Added an option to update the EMA Device firmware by the user ===================================================================== 2.4.2 - Adjusted the delete function for project items in the contextual menu - Added FFT channel - Adjusted mouse double-click timing when adding points to graphs - Improved software DPI awareness - Various bug fixes and performance improvements ===================================================================== 2.4.1 - Minor hotfixes and improvements ===================================================================== 2.4.0 DISCLAIMER: * May require a Dyno software update. Please contact customer support or downgrade if any issues arise. - Added vertical and horizontal lines at zero points in graphs for improved viewing - Improved Dyno connectivity to reduce connection issues - Temporarily disabled gas-pressure elimination for Scotch-Yoke Dyno* - Changed minimum test speed on Shock Dyno to 10 mm/sec* - LABA7 Dyno files are now associated with the application and can be opened by double-clicking - Added the ability to pop out graphs into a separate window - Added an option to eliminate First-Run Average under Test Summary - Added displacement-shift option under Test Summary - Added the ability to connect custom sensors to EMA Dyno - New option to print Force vs. Avg. Velocity speed table - Added the ability to print highlighted tests without selecting them - Added a quick-print button in the Test Summary window - Comparison report type now allows separating tests by their speed - Bug fixes - Other minor UI improvements ===================================================================== 2.3.0 - Implemented auto-update feature